Print: JENSLEV 4 drawer 1 door chest | assemble.help

Drawing step 1 of 17

Assembly guide

JENSLEV

4 drawer 1 door chest

2 h 10 min · one person · 17 steps · 28 panels · 116 fittings

Tools

Phillips screwdriver
Hammer
Tape measure (nice to have)
Drill (nice to have)
Pencil (nice to have)
Box cutter (nice to have)

Panels

ASide panel2×
BTop panel1×
CBottom panel1×
DMiddle shelf1×
EBack panel1×
FShelf1×
GDoor1×
HDrawer front4×
JDrawer side8×
KDrawer back4×
LDrawer bottom4×

Fittings

Wooden dowel 8 × 30 mm12×
Cam bolt 34 mm12×
Drawer runner 300 mm8×
Screw 3.5 × 14 mm22×
Cam lock 15 mm12×
Nail 1.6 × 20 mm22×
Shelf pin 5 mm4×
Hinge 2×
Screw 4 × 30 mm16×
Knob 5×
Wall bracket 1×
Wall plug 8 × 35 mm (not in the box)1×
Screw 5 × 50 mm (not in the box)1×

Follow it in 3D, read out loud: assemble.help/build/4-drawer-1-door-chest-jenslev-whiteNot affiliated with JYSK. Check each step against the paper manual.

112×12×

Fit the dowels and bolts into both sides

28×16×

Screw the drawer runners onto the sides

3

Attach the panels to one side

4

Add the other side

512×

Lock the cam locks

6

Turn it face down

JENSLEV, 4 drawer 1 door chest2 / 4

7

Check that it's square

822×

Nail on the back panel

9

Stand it up

104×

Add the shelf pins and the shelf

112×4×

Press the hinges into the door

12

Hang the door

JENSLEV, 4 drawer 1 door chest3 / 4

13

Line up the doors

144×

Put the drawers together (do this 4 times)

15

Slide in all 4 drawers

165×

Screw on the knobs

171×2×1×1×

Fix it to the wall

JENSLEV, 4 drawer 1 door chest4 / 4